Skip to content
Business

Water Quality Enviconment

Improvement of condensate water quality environment through oil-water separators

Condensate discharged from the air compressor is mixed with oil and discharged in a state of serious contamination.
Condensate is designated as waste, so water pollution prevention facilities should be installed and discharged.

Damage caused by condensate

Air in the atmosphere passes through the compressed rotor and contains oil. It is discharged with more than 2,000 ppm of oil through drain lines such as receiver tanks, dryers, and filters of the following process. Regulations for Water Quality Environment (5ppm or less)

Amount of occurred condensate ?

  • Compressor :100 hp
  • Required values for condensate calculation: compressor hp, pressure to use, running time (daily, yearly), machine efficiency
division
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sept
Oct
Nov
Dec
Temperature(°C)
-3
-2
4
11
17
21
25
26
21
14
7
-1
Humidity(%)
65
62
62
65
69
71
79
76
72
68
63
66
Air Comp
126
149
778
1,963
2,977
3,879
5,717
5,712
4,005
2,436
1,203
330
Air Dryer
687
687
687
751
1,199
1,537
2,019
2,139
1,573
959
687
687
Total(ℓ/month)
813
836
1,465
2,614
4,176
5,452
7,736
7,851
5,578
3,395
1,890
1,017
Average(ℓ/day)
32.5
33.5
58.6
104.6
167.0
218.1
309.4
314.0
223.1
135.8
75.6
40.7
Condensate Occurrence Point
division
Compressor
Receiver tank
Dryer
filter
winter
78%
11%
11%
Spring / Autumn
61%
13%
21%
4%
Summer
61%
11%
25%
3%

Method of discharging condensate

Filtering Type

  • Condensate entering the oil-water separator reduces pressure through the pressure relief chamber
  • The condensate, which has been first separated by gravity separation, is pulled up from the bottom and moved to the filter to filter out
  • Oil raised due to the separation of gravity is drained from the top to the oil tank
  • Using an external filter method, it is easy to replace the filter without spilling out the condensate

Chemical Type

  • Stirring the splitting agent type oil-water separator
  • Solution of condensate with severe emulsion
  • Condensate inflow into the Pre-Separation Tank is divided by gravity separation
  • When the water level rises, the sensor detects and the suction pump operates to transfer condensate to the stirring tank
  • In a stirring tank with the constant amount of splitting agent, mix the condensate with the splitting agent to form a floc and drain it
  • Drained floc and condensates are filtered through the filter bag and only clean water is discharged

준비중입니다.

Coming soon.